The STEVAL-ISA147V3 is a digital switch mode AC-DC converter consisting of two power stages: an input semi-bridgeless power factor corrector (SBPFC) controlled by an STM32F051K8, and a regulation stage implemented with an LLC half bridge with synchronous rectification (SR), controlled by an STM32F334C8 microcontroller.This 500 W AC-DC converter uses the so-called bridgeless PFC topology, with the advantage of lower conduction losses and higher efficiency by eliminating the need for a diode rectifier stage. This choice also allows a reduced component count compared to a standard PFC.The input stage is typically controlled using an outer voltage loop for bus voltage regulation and an inner control loop to shape the current according to a sinusoidal waveform. The outer loop adjusts the current reference in order to maintain a regulated bus voltage, independent of load or input voltage variations. The output isolation and regulation stage is implemented using a half-bridge LLC topology, operating with constant duty cycle and variable frequency control.
Reference Design 基於ST STM32F334C8 Cortex M4 MCU的數位AC-DC電源供應器方案
Input AC voltage: 90 V to 264 V Input AC frequency: 45 Hz to 65 Hz Nominal power: 500 W Output voltage: 12 V Semi-Bridgeless PFC stage DC-DC stage: resonant LLC with synchronous rectification Peak efficiency: 94% PFC switching frequency: 60 kHz DC-DC switching frequency: 80 kHz to 115 kHz (burst mode above) HF transformer isolation voltage: 4 kV Cooling: natural convection up to 300 W, forced cooling above 300 W PFC control: managed by STM32F051K8 LLC control: managed by STM32F334C8 Input short-circuit protection Input under/overvoltage protection Input under/overfrequency protection DC Bus under/overvoltage protection Output short-circuit protection Output under/overvoltage protection Overtemperature protection RoHS compliant
Go to ST Micro for more informationhttps://www.st.com/content/st_com/en/products/evaluation-tools/solution-evaluation-tools/psu-and-converter-solution-eval-boards/steval-isa147v3.html