The P-NUCLEO-IOD01A1 is an STM32 Nucleo pack composed of the NUCLEOL073RZ development board, the STEVAL-IOD003V1 evaluation board and the XNUCLEO-IKS01A2 expansion board. The STEVAL-IOD003V1 offers an IO-Link device PHY layer (L6362A) while the NUCLEO-L073RZ runs an IO-Link demo stack (developed by and property of TEConcept Gmbh) compatible with rev 1.1 and firmware controlling the X-NUCLEOIKS01A2 sensors. The STM32 Nucleo pack provides an affordable and easy-to-use solution for the development of IO-Link and SIO applications, L6362A communication features and robustness, together with the STM32L073RZT6 computation performance.
大大通精彩博文 ST 意法半導體的IO-LINK 介面IC介紹
• Equipped with Arduino UNO R3 connectors and compatible with STEVALIOD003V1, X-NUCLEO-IKS01A2 and NUCLEO-L073RZ boards. • The STEVAL-IOD003V1 features: – IO-Link (PHY) device layer based on L6362A – Operating voltage range 6.5 to 35 V – Dedicated CQ overload pin (wake-up) – Diagnostics pin (UVLO, overtemperature and cut-off) – UART interface – Linear regulators for independent supply from +24 V bus (12 mA 3.3 V and 100 mA 12 V) – LEDs for status and diagnostics – Overload and overheating protections with non-dissipative cut-off function – Full reverse polarity on IO-Link interface pins – EMC protections according to IO-Link v1.1 and IEC 60947-5-2 – Ground and VCC wire break protections • The X-NUCLEO-IKS01A2 features: – LSM6DSL 3D accelerometer and 3D gyroscope – LSM303AGR 3D accelerometer and 3D magnetometer – LPS22HB pressure sensor – HTS221 capacitive digital relative humidity and temperature – DIL24 socket for additional MEMS adapters and other sensors – Free comprehensive development firmware library and samples for all sensors compatible with STM32Cube firmware • The NUCLEO-L073RZ features: – STM32L073RZT6 32-bit microcontroller based on ARM® Cortex®-M0+ core – Pre-programmed IO-Link device stack (v1.1 compatible) – Arduino UNO R3 connectivity and ST morpho extension pin headers – Mbed-enabled (http://mbed.org) – On-board ST-LINK/V2-1 debugger/programmer with SWD connector
https://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-sense-hw/p-nucleo-iod01a1.html
